Design of the Control System for a Four-wheel Driven Micro Electric Vehicle

發布時間：2010-7-18 08:59 發布者：robertqi

關鍵詞： control , Design , Driven , Electric , Vehicle

Design of the Control System for a Four-wheel Driven Micro Electric Vehicle

Abstract—In this paper, the control system for a four-wheeldriven
micro electric vehicle has been designed, which consists of
vehicle control unit (VCU), wheel-motor control unit (MCU),
battery management system (BMS) and time-triggered CAN
(TTCAN) communication network. The VCU, as a key
component of the whole system, gives orders to other modules
based on the driver manipulation, data from other modules via
TTCAN and information collected by other vehicle sensors. The
battery management system (BMS) is responsible for the battery
maintenance and state estimation. The four motor control units
(MCU) control the wheel motor locally according to the
command from VCU. The TTCAN network is based on the
conventional CAN and realized by software.
Keywords-micro electric viehcle; control system design;BLDC
motor;battery management system;TTCAN

5289671[1]Design of the Control System for a Four-wheel Driven Micro Electric Vehicle.pdf (507.99 KB)

本文地址：http://m.qingdxww.cn/thread-15507-1-1.html 【打印本頁】

本站部分文章為轉載或網友發布，目的在于傳遞和分享信息，并不代表本網贊同其觀點和對其真實性負責；文章版權歸原作者及原出處所有，如涉及作品內容、版權和其它問題，我們將根據著作權人的要求，第一時間更正或刪除。