国产毛片a精品毛-国产毛片黄片-国产毛片久久国产-国产毛片久久精品-青娱乐极品在线-青娱乐精品

ST STEVAL-ISA076V2 USB兼容鋰電池充電解決方案

發布時間:2012-8-30 13:21    發布者:1770309616
關鍵詞: ST , STEVAL-ISA076V2 , USB , 鋰電池 , 充電
ST公司的 STEVAL-ISA076V2是基于L6924U的USB兼容的鋰電池充電解決方案.L6924U是單片電池充電器,能從USB電源或外接AC適配器對單節鋰離子/鋰聚合物電池進行充電,支持USB低電壓和高電壓模式,可編程電流高達1A(AC適配器模式),輸出電壓4.2V± 1 %,線性或準脈沖工作模式,主要用在PDA,GPS和MP3播放器,USB供電設備,手機,數碼相機,無線設備和單獨充電器.本文介紹了L6924U主要特性,框圖,基本應用電路和演示板STEVAL-ISA076V2主要特性,電路圖,材料清單和PCB布局圖.

The L6924U is a fully monolithic battery charger that safely charges single-cell Li-Ion/Polymer battery from either an USB power source or an AC adapter. In USB mode, the L6924U supports both low power and high power mode. Alternatively the device can charge from an AC wall adapter. The ideal solution for space-limited portable products integrates the power MOSFET, reverse blocking diode, sense resistor and thermal protection into a compact VFQFPN16 package. When an external voltage regulated adapter or USB port is used, the L6924U works in linear mode, and charges the battery in a constant current constant voltage (CC/CV) profile. Moreover, when a current-limited adapter is used, the device can operate in quasi-pulse mode, dramatically reducing the power dissipation.

Regardless of the charging approach, a closed loop thermal control avoids device overheating. The device has an operating input voltage ranging from 2.5 V to 12 V and it allows the user to program many parameters, such as fast-charge current, end-of-charge current threshold, and charge timer. The L6924U offers two open collector outputs for diagnostic purposes, which can be used to either drive two external LEDs or communicate with a host microcontroller. Finally, the L6924U also provides other features like gas gauge function, check for battery presence, and monitors and protects the battery from unsafe thermal conditions.

L6924U主要特性:

■ Fully integrated solution, with power MOSFET, reverse blocking diode, sense resistor, and thermal protection

■ Charges single-cell Li-Ion batteries from selectable AC adapter or USB input

■ Programmable charge current up to 1 A in AC adapter mode

■ Programmable charging current in USB mode for both high power and low power inputs

■ 4.2 V output voltage with ± 1 % accuracy

Linear or quasi-pulse operating mode

■ Closed loop thermal control

■ Programmable end-of-charge current

■ Programmable charge timer

■ (NTC) or (PTC) thermistor interface for battery temperature monitoring and protection

■ Status outputs to drive LEDs or to interface with a host processor

■ Small VFQFPN 16-leads package (3 x 3 mm)

L6924U應用:

■ PDAs, GPS and MP3 players

■ USB powered devices

■ Cellular phones

■ Digital still cameras

■ Standalone chargers

■ Wireless appliances

圖1.L6924U框圖

圖2.L6924U基本應用電路圖

演示板STEVAL-ISA076V2

The STEVAL-ISA076V2 demonstration board is based on the L6924U which is a fully monolithic battery charger dedicated to single-cell Li-Ion/Polymer battery packs. It is the ideal solution for space-limited applications, such as PDAs, handheld equipment, cellular phones, and digital cameras.

When an external voltage regulated adapter or USB port is used, the L6924U works in linear mode, and charges the battery in a constant current/constant voltage (CC/CV) profile.

Moreover, when a current-limited adapter is used, the device can operate in Quasi-Pulse Mode, dramatically reducing the power dissipation.

演示板STEVAL-ISA076V2主要特性:

■ Operating input voltage up to 12 V

■ Fully integrated solution with power MOSFET, reverse blocking diode, sense resistor, and thermal control

■ AC adapter or USB mode selection

■ Programmable charge current for both AC adapter and USB power sources separately

■ Low power/high power selection in USB mode

■ Both linear and quasi-pulse operation

■ 4.2 V preset charge voltage (±1 % accuracy)

■ Programmable termination current

■ Programmable charge timer

■ Status outputs to drive LEDs or host processor interface

■ Battery absence detection

■ Closed loop thermal control

■ NTC or PTC thermistor interface for battery temperature monitoring and protection

■ RoHS compliant

圖3.演示板STEVAL-ISA076V2外形圖

圖4.演示板STEVAL-ISA076V2電路圖
演示板STEVAL-ISA076V2材料清單(BOM):



圖5.演示板STEVAL-ISA076V2 PCB布局圖(頂層)

圖6.演示板STEVAL-ISA076V2 PCB布局圖(底層)
詳情請見:
CD00288859.pdf (88.56 KB)

CD00197120.pdf (789.96 KB)

來源:網絡

本文地址:http://m.qingdxww.cn/thread-96577-1-1.html     【打印本頁】

本站部分文章為轉載或網友發布,目的在于傳遞和分享信息,并不代表本網贊同其觀點和對其真實性負責;文章版權歸原作者及原出處所有,如涉及作品內容、版權和其它問題,我們將根據著作權人的要求,第一時間更正或刪除。
您需要登錄后才可以發表評論 登錄 | 立即注冊

廠商推薦

  • Microchip視頻專區
  • Chiptorials——如何使用ATECC608 TrustFLEX實現公鑰輪換
  • 無線充電基礎知識及應用培訓教程
  • FPGA設計流程培訓教程
  • Chiptorials ——使用ATECC608 TrustFLEX實現基本非對稱身份驗證
  • 貿澤電子(Mouser)專區

相關在線工具

相關視頻

關于我們  -  服務條款  -  使用指南  -  站點地圖  -  友情鏈接  -  聯系我們
電子工程網 © 版權所有   京ICP備16069177號 | 京公網安備11010502021702
快速回復 返回頂部 返回列表
主站蜘蛛池模板: 色婷婷久| 在线亚洲天堂 | 黄色午夜 | 日韩精品免费一线在线观看 | 91preon国产在线观看 | 欧美成人午夜视频在线观看 | 国产午夜人做人免费视频中文 | 国产伦一区二区三区四区久久 | 好吊日视频在线 | 在线欧美日韩 | 成人免费看视频 | 狠狠色婷婷综合天天久久丁香 | 国产欧美视频一区二区三区 | 向日葵视频在线免费观看 | 精品中文字幕一区在线 | 亚洲成人精品久久 | 岛国视频在线 | 欧美成人免费一级人片 | 日韩精品一区二区三区中文字幕 | 天堂网在线www | 亚洲精品自在在线观看 | 亚洲综合成人网在线观看 | 久久久久国产精品免费看 | 亚洲一区欧洲一区 | 国产亚洲欧美在线播放网站 | 精品伊人久久久99热这里只 | 黄页网站 | 国内精品久久久久影 | 99精品国产成人a∨免费看 | 天天操操 | 韩国a级毛片 | 欧美亚洲另类在线 | 丁香婷婷九月 | 亚洲国产精品免费在线观看 | 午夜一级毛片不卡 | 中文在线最新版天堂8 | 国产男人天堂 | 热久久99影院 | 日本高清乱码中文字幕 | 91亚洲福利 | 国产精品日韩欧美亚洲另类 |