国产毛片a精品毛-国产毛片黄片-国产毛片久久国产-国产毛片久久精品-青娱乐极品在线-青娱乐精品

TI bq25504高效率超低功耗能量采集解決方案~*

發布時間:2011-11-1 11:05    發布者:1770309616
關鍵詞: bq25504 , TI , 能量采集
TI 公司的bq25504是高效率超低功耗能量采集升壓充電IC,可以管理各種直流源如太陽能或熱電發生器(TEG)所產生的微瓦或毫瓦功率,超低靜態電流小于330nA,可連續從VIN大于80mV的輸入源采集能量,冷起動電壓VIN大于330mV,具有可編程的動態MPPT,所采集的能量可儲存在鋰電池,薄膜電池,超級電容或傳統電容.主要用于能量采集,太陽能充電器, TEG收集,無線傳感器網絡(WSN),工業監視,能量存儲,環境監測,橋梁/結構健康監測(SHM),智能建筑物控制,手持保健設備以及娛樂系統遙控等.本文介紹了bq25504主要優勢和特性,方框圖, 太陽能,TEG和MPPT應用電路圖,bq25504 EVM評估板性能指標,電路圖和材料清單,PCB布局圖以及太陽能能量采集總體解決方案包括傳統逆變器解決方案框圖, 微逆變器解決方案框圖和太陽能街燈照明方框圖.

Texas Instruments introduces highly efficient boost charger IC for nano power energy harvesting

The bq25504 is the first of a new family of intelligent integrated energy harvesting Nano-Power management solutions that are well suited for meeting the special needs of ultra low power applications. The product is specifically designed to efficiently acquire and manage the microwatts (μW) to miliwatts (mW) of power generated from a variety of DC sources like photovoltaic (solar) or thermal electric generators. The bq25504 is the first device of its kind to implement a highly efficient boost converter/charger targeted toward products and systems, such as wireless sensor networks (WSN) which have stringent power and operational demands. The design of the bq25504 starts with a DCDC boost converter/charger that requires only microwatts of power to begin operating.

bq25504主要優勢和特性:

• Ultra Low Power With High Efficiency DC/DC Boost Converter/Charger

–Continuous Energy Harvesting From Low Input Sources: VIN ≥ 80 mV(Typical)

–Ultra Low Quiescent Current: IQ < 330 nA (Typical)

–Cold-Start Voltage: VIN ≥ 330 mV (Typical)

• Programmable Dynamic Maximum Power Point Tracking (MPPT)

– Integrated Dynamic Maximum Power Point Tracking for Optimal Energy Extraction From a Variety of Energy Generation Sources

–Input Voltage Regulation Prevents Collapsing Input Source

• Energy Storage

–Energy can be Stored to Re-Chargeable Li-ion Batteries, Thin-film Batteries, Super-Capacitors, or Conventional Capacitors

• Battery Charging and Protection User Programmable Undervoltage /Overvoltage Levels

– On-Chip Temperature Sensor with Programmable Overtemperature Shutoff

• Battery Status Output

–Battery Good Output Pin

–Programmable Threshold and Hysteresis

–Warn Attached Microcontrollers of Pending Loss of Power

–Can be Used to Enable/Disable System Loads

bq25504應用:

• Energy Harvesting

• Solar Charger

• Thermal Electric Generator (TEG) Harvesting

• Wireless Sensor Networks (WSN)

• Industrial Monitoring

• Energy Storage

• Environmental Monitoring

• Bridge / Structural Health Monitoring (SHM)

• Smart Building Controls

• Portable and Wearable Health Devices

• Entertainment System Remote Controls

圖1.bq25504功能方框圖

圖2.bq25504太陽能應用電路圖

VIN_DC = 1.2 V, CSTOR= 4.7 μF, LBST= 22 μH, CHVR= 4.7 μF, CREF= 10 nF, TSD_PROTL (65°C), MPPT (VOC) = 80% VBAT_OV = 3.1 V, VBAT_UV = 2.2 V, VBAT_OK = 2.4 V, VBAT_OK_HYST = 2.8 V, ROK1 = 4.42 MΩ, ROK2 = 4.22 MΩ, ROK3 = 1.43 MΩ, ROV1 = 5.9 MΩ, ROV2 = 4.02 MΩ, RUV1= 5.6 MΩ, RUV2 = 4.42 MΩ, ROC1= 15.62 MΩ, ROC2 = 4.42 MΩ

圖3.bq25504 TEG應用電路圖

VIN_DC = 0.5 V, CSTOR = 4.7 μF, LBST = 22 μH, CHVR = 4.7 μF, CREF = 10 nF, TSD_PROTH (120°C), MPPT (VOC) = 50% VBAT_OV = 4.2 V, VBAT_UV = 3.2 V, VBAT_OK = 3.5 V, VBAT_OK_HYST = 3.7 V, ROK1 = 3.32 MΩ, ROK2 = 6.12 MΩ, ROK3 = 0.542 MΩ, ROV1 = 4.42 MΩ, ROV2 = 5.62 MΩ, RUV1 = 3.83 MΩ, RUV2 = 6.12 MΩ, ROC1 = 10 MΩ, ROC2 = 10 MΩ

圖4.bq25504 MPPT應用電路圖

VIN_DC = 1.2 V, CSTOR = 4.7 μF, LBST = 22 μH, CHVR = 4.7 μF, TSD_PROTL (65℃),
MPPT (VOC) = Disabled VBAT_OV = 3.3 V, VBAT_UV = 2.2 V, VBAT_OK = 2.8 V, VBAT_OK_HYST = 3.1 V,ROK1 = 3.97 MΩ, ROK2 = 5.05 MΩ, ROK3 = 0.976 MΩ, ROV1 = 5.56 MΩ, ROV2 = 4.48 MΩ, RUV1 = 5.56 MΩ, RUV2 = 4.42 MΩ

bq25504 EVM評估板

bq25504 EVM – Ultra Low Power Boost Converter with Battery Management for Energy Harvester Applications

bq25504EVM-674 – Ultra Low Power Boost Converter with Battery Management for Energy Harvester Applications. This EVM is programmed from the factory for settings compatible with most MCU’s and 3V coin cell batteries. The EVM is programmed to deliver a 3.1VDC maximum voltage (OV) for charging the storage element and the under voltage is programmed to 2.2VDC. The VBAT_OK indication toggles high when VSTOR ramps up at 2.8VDC and when VSTOR ramps down to 2.4VDC. The user’s guide describes the bq25504 evaluation module (EVM), how to perform a stand-alone evaluation and allows the EVM to interface with the system and host.

bq25504 EVM評估板主要特性:

Evaluation Module for bq25504

Ultra Low Power Boost Converter/Charger with Battery Management for Energy Harvester Applications

Resistor-programmable settings for under voltage, over voltage for flexible battery management Including POTs for fine tuning the settings (not populated)

Programmable push-pull output Indication for battery status (VBAT_OK)

Test Points for Key Signals Available for Testing Purpose – Easy Probe Hook-up Jumpers Available – Easy to Change Settings


圖5. bq25504 EVM評估板外形圖
bq25504 EVM評估板性能指標:



圖6. bq25504 EVM評估板電路圖
bq25504 EVM評估板材料清單(BOM):


圖7. bq25504 EVM評估板PCB布局圖

TI 太陽能能量采集總體解決方案

傳統逆變器解決方案

Central, or “traditional”, inverters are centralized power control units that convert DC power from a string of 72-cell solar panels to AC power for use on the electrical utility grid. These are usually large scale commercial or residential systems producing in excess of 1 kW of power. Maximum power point tracking for the entire string is done only at the inverter box, which may also include relays to “island” the solar system from the grid.

圖8.. 傳統逆變器解決方案框圖

微逆變器解決方案

Micro-inverters operate similarly to central inverter systems, but are installed on each individual panel and handle much less

power, typically 300 W. Micro-inverters provide the benefit of scalability for those who want to start small, yet have full

DC/AC conversion with MPPT, and expand later.

圖9.微逆變器解決方案框圖(1)

Micro-converters maximize the DC power point of a single solar panel and convert (down or up) the DC voltage to be transported downstream to a centralized AC (grid-tied) inverter. Being located on each panel, these systems are lower power (typ. 300 W) than centralized converters. These are sometimes called “optimizers” because they optimize the power of each panel, increasing the overall efficiency of the system.


圖10.微逆變器解決方案框圖(2)

3.電池充電解決方案

Off-grid solar power systems often need to charge a battery, or array of battery cells, that provide continuous power to the load when solar energy is no longer present. Often cost sensitive, in order to optimize the size, cost and usable power of the storage elements, off-grid systems also require that the power point be maximized. However, this can be done by employing, lower power and less complex MCUs than grid-tied systems or by employing a simple fixed power point – often set at 76% of VOC. Loads such as LED lighting and motors may require additional power boosting and/or control.

圖11.太陽能街燈照明方框圖.
詳情請見:
bq25504.pdf (1.08 MB)
sluu654a.pdf (753.81 KB) 以及
slyy027.pdf (409.79 KB)
本文地址:http://m.qingdxww.cn/thread-78474-1-1.html     【打印本頁】

本站部分文章為轉載或網友發布,目的在于傳遞和分享信息,并不代表本網贊同其觀點和對其真實性負責;文章版權歸原作者及原出處所有,如涉及作品內容、版權和其它問題,我們將根據著作權人的要求,第一時間更正或刪除。
您需要登錄后才可以發表評論 登錄 | 立即注冊

廠商推薦

  • Microchip視頻專區
  • 無線充電基礎知識及應用培訓教程
  • FPGA設計流程培訓教程
  • Chiptorials——如何使用ATECC608 TrustFLEX實現公鑰輪換
  • Chiptorials ——使用ATECC608 TrustFLEX實現基本非對稱身份驗證
  • 貿澤電子(Mouser)專區

相關視頻

關于我們  -  服務條款  -  使用指南  -  站點地圖  -  友情鏈接  -  聯系我們
電子工程網 © 版權所有   京ICP備16069177號 | 京公網安備11010502021702
快速回復 返回頂部 返回列表
主站蜘蛛池模板: 99日韩| 91国语精品3p在线观看 | 国产精品国产三级国产爱网 | 国产理论在线 | 曰本人一级毛片免费完整视频 | 亚洲一在线| 麻豆精品传媒视频观看 | 天堂a免费视频在线观看 | 青青草国产97免久久费观看 | 欧美一区二区三区激情视频 | 亚欧乱色视频大全 | 欧美 日韩 成人 | 日本jjzz| 成人精品亚洲 | 视频一区亚洲 | 日本www色视频成人免费 | 曰韩高清一级毛片 | 星武神诀在线观看全集免费播放 | 一区二区手机视频 | 4虎最新网址 | 成人精品视频一区二区在线 | 国产麻豆交换夫妇 | 香蕉视频一区 | 好看的亚洲视频 | www日本高清 | 亚洲自拍偷拍网 | 四虎成人国产精品视频 | 国产日产欧美一区二区三区 | 亚洲激情在线视频 | 在线观看日韩www视频免费 | 免费韩国一级毛片 | 在线日韩麻豆一区 | 免费观看亚洲 | 99久久久久国产 | 2021久久精品99精品久久 | 青青草华人在线 | 亚洲特一级毛片 | 麻豆传煤视频 | 久久精品国产99久久香蕉 | 麻豆儿| 99视频精品全国在线观看 |