|
Renesas公司的R8A66597 通用串行總線(USB)控制器,具有16位CPU總線接口,配備了USB主功能和可用于OTG的外設功能.器件內置了USB收發器,和USB 2.0所有傳輸類型兼容,內部緩沖存儲器是8.5KB.低功耗工作,內核電壓1.5V,主要用于導航系統,DVD,STB,音頻設備,打印機,外部存儲設備和其它配備了USB的設備.本文介紹了R8A66597主要特性,引腳功能框圖以及評估板R0K866597D020BR主要特性,電路圖,材料清單和PCB元件布局圖. The R8A66597 is a Universal Serial Bus (USB) Controller equipped with USB Host functions and Peripheral functions applicable for On-The-Go. When selecting the Host Controller function, it has two USB ports available for Hi-Speed, Full-Speed, and Low-Speed transfer compliant with USB Specification Revision 2.0. When selecting the Peripheral Controller function, it has one USB port available for Hi-Speed and Full-Speed transfer compliant with USB Specification Revision 2.0. This controller has a built-in USB transceiver and is compatible with all the transfer types defined in USB Specification Revision 2.0. The internal buffer memory is 8.5K, and a maximum ten pipes can be used for transferring data. For Pipe1 to Pipe9, any endpoint address can be assigned matching the peripheral functions for communication or user system. Separate bus or multiplex bus can be selected for the CPU connection. A split bus interface (exclusively for the DMA interface) that is different from the CPU bus interface is provided and is suitable for systems demanding high-performance data transfer. R8A66597主要特性: 1. Built-in Host Controller and Peripheral Controller compatible with Hi-Speed USB • Built-in USB Host Controller and Peripheral Controller • Toggle between USB Host functions and Peripheral functions is possible according to what is written to the register • Built-in USB transceiver 2.Low power consumption • 1.5V core power consumes less power when operating • With the installed Low Power Sleep Mode functions, less power is consumed when the USB is not in use, which is also applicable for portable devices • Standby power consumption can be greatly reduced by keeping only the VIF power source ON when not using the USB function. • Operational with a 3.3V single power supply using the internal 1.5V core power regulator 3.Space-saving package • Few external devices and space-saving package VBUS signal can be connected directly to the controller input pin Built-in D+ pull-up resistor (for Peripheral function) Built-in D+ and D- pull-down resistors (for Host function) Built-in D+ and D- terminating resistors (for Hi-Speed operations) Built-in D+ and D- output resistors (for Full-Speed and Low-Speed operations) 4.Compatible with all USB transfer types • Compatible with all USB transfer types, including isochronous transfer Control transfer Bulk transfer Interrupt transfer (not compatible with high-bandwidth) Isochronous transfer (not compatible with high-bandwidth) 5. Bus interface • 16-bit CPU bus interface Compatible with 16-bit separate bus/16-bit multiplex bus ������ Compatible with DMA transfer in 8-bit/16-bit access (slave function) • 8-bit split bus (exclusive for external direct memory access controller (DMAC)) interface • Built-in two DMA interface channels • DMA transfer provides 40MB/second high-performance data transfer 6.Pipe configuration • Built-in 8.5KB buffer memory for USB communication • Maximum of ten pipes can be selected (including default control pipe) • Programmable pipe configuration • Any endpoint address can be assigned to Pipe1 to Pipe9 • Transfer conditions that can be written for each pipe Pipe0: Control transfer, single buffer fixed at 256 bytes Pipe1~Pipe2: Bulk transfer/Isochronous transfer, continuous transfer modes. programmable buffer size (specifiable up to 2K bytes per side, double buffer also specifiable) Pipe3~Pipe5: Bulk transfer, continuous transfer modes,programmable buffer size (specifiable up to 2K bytes per side, double buffer also specifiable) Pipe6~Pipe9: Interrupt transfer, single buffer fixed at 64 bytes 7. Features when selecting Host functions • Compatible with Hi-Speed (480Mbps), Full-Speed (12Mbps) and Low-Speed transfer (1.5Mbps) • Several Peripheral devices can be connected through one tier hub • Reset handshake auto response • SOF and packet transmission schedule automation • Transfer interval setup function for Isochronous and Interrupt transfer 8.Features when selecting Peripheral functions • Compatible with Hi-Speed (480Mbps) and Full-Speed transfer (12Mbps) • Auto identification of Hi-Speed or Full-Speed operations according to reset handshake auto response • Control transfer stage management function • Device state management function • Auto response function related to SET_ADDRESS request • NAK response interrupt function (NRDY) • SOF interpolation function 9.Functions that Provide On-The-Go Support • Built-in ID pin and ID pin monitor bit enables determination of A-Device/B-Device at start-up • Built-in control bit facilitates Host Negotiation Protocol 10.Other functions • Compatible with the CPU of big-endian or little-endian according to the byte-endian swap function • Transfer end function according to transaction count • End function of DMA transfer by external trigger (DEND pin) • SOF plus output function • Three types of input clock can be selected by built-in PLL Select from 48MHz/24MHz/12MHz • Function to modify the BRDY interrupt event notification timing (BFRE) • Function to clear the auto buffer memory after the pipe data specified in the DxFIFO port is read (DCLRM) • Function to provide the auto clock from clock stop status • NAK setting function (SHTNAK) for PID response corresponding to transfer end R8A66597主要應用: Navigation systems, DVD recorders, set-top boxes, audio devices, printers, external storage devices and other devices equipped with USB. The R0K866597D020BR is the evaluation board of the USB Host function and built-in functions. This instruction manual explains how to setup up and operate the related hardware and offers cautionary notes concerning usage. 
圖1.R8A66597引腳功能框圖 R8A66597評估板R0K866597D020BR The R0K866597D020BR is an evaluation board for the Renesas Hi-Speed USB ASSP R8A66597FP. Two USB-A receptacles are mounted on the board for evaluation of USB host operations using USB port0 and USB port1 of R8A66597. CN1 can be used for evaluation of USB peripheral operations. Please refer to the data sheet “USB2.0 Dual Function Controller R8A66597FP” for detailed specifications of the R8A66597. 評估板R0K866597D020BR主要特性: (1) By connecting this board to a control board using the interface connector of this board, it is possible to evaluate the user system. (2) A solder pattern is prepared on the USB signal lines for chip common mode choke coils. It is possible to do EMI suppression evaluation. (3) A solder pattern is prepared on the USB signal lines for ESD protection devices. It is possible to do ESD protection evaluation. (4) It is possible to supply 3.3V or 1.8V to the interface power VIF of R8A66597FP. (5) It is possible to test R8A66597FP’s functions (excluding split bus) by connecting with Renesas Starter Kits board. It is possible to supply 5V, 500mA to the VBUS.
圖2.評估板R0K866597D020BR外形圖
圖3.評估板R0K866597D020BR電路圖 評估板R0K866597D020BR材料清單(BOM):
圖4.評估板R0K866597D020BR PCB元件布局圖(頂層)
圖5.評估板R0K866597D020BR PCB元件布局圖(底層) 詳情請見: 
rej03f0229_r8a66597ds.pdf
(1.74 MB)
和
r19an0005ej_66597d020.pdf
(927.16 KB)
來源:網絡 |
|
Renesas公司的R8A66597通用串行總線(USB)控制器，具有16位CPU總線接口，配備了USB主功能和可用于OTG的外設功能。器件內置了USB收發器，和USB2.0所有傳輸類型兼容，內部緩沖存儲器是8.5kB。低功耗工作，內核電壓1.5V，主要用于導航系統、DVD、STB、音頻設備、打印機、外部存儲設備和其他配備了USB的設備。 R8A66597是一個通用串行總線（USB）控制器，配有USB主機功能和外設功能，適用于On-The-Go功能。當選擇主機控制器功能時，它有兩個USB端口，可用于高速，全速和低速傳輸，并符合USB規范修訂版2.0。在選擇外設控制器功能時，它有一個可用的USB端口，用于高速和全速傳送，符合USB規范修訂版2.0。該控制器具有一個內置的USB收發器，兼容所有的USB規范修訂版2.0的傳輸類型。 內部緩沖存儲器為8.5k，最多10管道可用于傳輸數據。對于Pipe1~Pipe9，可以分配任何端點地址，并與通信或用戶系統的外設功能相匹配。可選擇獨立總線，或多路復用總線用于CPU的連接。還具有分割總線接口（專為DMA接口），與CPU總線接口不同，適用于高性能要求的數據傳輸?shù)南到y(tǒng)。
圖1 R8A66597引腳功能框圖 R8A66597主要特性 •內置與Hi-Speed USB兼容的主機控制器和外設控制器 –內置USB主機控制器和外設控制器 – USB主機功能和外設功能之間的 切換是根據的寄存器寫的內容決定 –內置USB收發器 •低功耗 –1.5V核電源，運行時消耗更少的功率 –其低功耗的睡眠模式功能，在USB不使用時，消耗更少的功率，這也適用于便攜式設備 –在不使用USB功能時，只保留了VIF電源，待機功耗可以大大減少 –使用3.3V單電源供電，采用內部1.5V核電壓調節器 •節省空間的封裝，很少的外部設備和節省空間的封裝 –VBUS信號可以直接連接到控制器的輸入引腳 –內置的D+上拉電阻（外圍功能） –內置的D+和D-上拉下拉電阻（主機功能） –內置的D+和D-的終端電阻（支持Hi-Speed操作） –內置的D+和D-輸出電阻（全速和低速運行） •兼容所有USB傳輸類型，兼容所有USB傳輸類型，包括同步傳輸 –控制傳輸 –批量傳輸 –中斷傳輸（不支持高帶寬） –同步傳輸（不支持高帶寬） •總線接口，16位CPU總線接口 –與16位獨立bus/16bits，多路復用總線兼容 – 8bits/16bits訪問與DMA傳輸兼容（仆功能） – 8位分割總線接口（不包括外部直接存儲器存取控制器DMAC）界面 –內置兩個DMA接口通道 – DMA傳輸提供了40MB/s的高性能數據傳輸 • Pipe配置 –內置8.5kB緩沖存儲器，用于USB 通信 –最多可以選擇10個管道（包括默認控制管道） –可編程管道配置 –任何端點地址可以分配給Pipe1~Pipe9 –每個管道可以寫轉移條件。 – Pipe0：控制傳輸，緩沖區固定為 256B – Pipe1~Pipe2：批量傳輸/同步傳輸，連續傳輸模式 –可編程緩沖區的大小（每邊最多可指定2kB，也可指定雙緩沖） – Pipe3~Pipe5：批量傳輸，連續傳輸模式，可編程緩沖區的大小（每邊最多可指定2kB，也可指定雙緩沖） – Pipe6~Pipe9：中斷傳輸方式，固定為64kB的緩沖區 •選擇主機功能的特點 –與高速（480Mbps），全速（12Mbps）和低（1.5Mbps）傳輸兼容 –一些外圍設備可以通過層集線器連接 –復位握手自動回復 – SOF和數據包傳輸調度自動化 –傳輸間隔設置同步和中斷傳輸功能 •選擇外設功能時的特性， –與Hi-Speed（480Mbps）和全速（12Mbps）傳輸兼容 –自動識別高速或全速運行握手自動復位響應 –控制傳輸階段管理功能 –設備狀態管理功能 – SET_ADDRESS請求相關的自動響應功能 – NAK響應中斷功能（NRDY） –SOF插功能 •提供ON-The-Go支持的功能 –內置ID引腳和ID引腳顯示器位，在的啟動時，能夠確定A-Device/B-Device –內置的控制位，有利于主機協商協議 •其他功能 –根據byte-endian的交換功能，兼容CPU的big-endian或little-endian –根據交易次數，決定傳送端功能 –通過外部觸發（DEND引腳）決定DMA傳輸功能 – SOF增加輸出功能 –通過內置的PLL，可以選擇三種類型的輸入時鐘，從48MHz/24MHz/12MHz選擇 –修改BRDY中斷事件通知的定時（BFRE）功能 – DxFIFO端口指定管數據（DCLRM）讀后，清除自動緩沖存儲器功能 –提供自動時鐘，時鐘停止狀態功能 – PID響應傳輸結束的NAK設置的功能（SHTNAK）
圖2 評估板R0K866597D020BR電路圖 R8A66597主要應用 •導航系統 •DVD錄像機 •機頂盒 •音頻設備 •打印機 •配備了USB的外部存儲設備和其他 設備 評估板 R0K866597D020BR R0K866597D020BR是瑞薩公司高速USB ASSP R8A66597FP評估電路板。兩個USB-A插座安裝在電路板上用于USB主機操作評估，采用了R8A66597的USB端口0和USB端口1。CN1可用于評價USB外圍操作。可以提供VBUS 5V，500mA電源。 R0K866597D020BR主要特性 •通過連接此板到控制電路板（采用此板使用的接口連接器），能夠評價用戶系統 • USB信號線上備有焊接結構圖，用于芯片共模扼流線圈。可以EMI抑制評價 • USB信號線上備有焊接結構圖，用于 ESD保護器件，可以ESD保護評估 • R8A66597FP接口電源VIF上可以 提供3.3V或1.8V電源 •通過瑞薩入門套件板，可以測試R8A66597FP的功能（不包括分割總線） （中電網、《世界電子元器件》） |
