TRINAMIC TMC389三相步進馬達驅動方案

發布時間：2012-4-9 14:00 發布者：1770309616

關鍵詞： TMC389 , TRINAMIC , 步進馬達 , 驅動

TRINAMIC 公司的TMC389是三相步進馬達驅動器,集成了低諧振的三相斬波器用于靜態馬達工作,能直接驅動三個外接N/P溝雙MOSFET,馬達電流高達8A和60V,多達171個微步距,采用基于自動負載調整馬達電流的coolStep™s20,節能高達75%,主要用在精密三相步進馬達驅動,醫療和光學應用,機器人和舞臺照明.本文介紹了TMC389主要特性和優勢,方框圖和應用電路圖,和高壓大電流功率級電路圖以及評估板TMC389?a href="http://m.qingdxww.cn/keyword/CEVA" target="_blank" class="relatedlink">CEVAL主要特性,應用框圖,電路圖和PCB元件布局圖.

The TMC389 is an energy efficient three phase stepper motor driver for high resolution microstepping applications. It integrates a low resonance three phase chopper for quiet motor operation. Its step and direction interface allows simple use. An SPI™ management interface allows for parameterization and diagnostics. The TMC389 directly drives 3 external N/P channel dual MOSFETs for motor currents up to 8A and up to 60V. Protection and diagnostic features further reduce system cost and increase reliability.

TMC389產品亮點:

 Up to 171 microsteps (256 sine wave steps) using step/direction interface or 20 Bit SPI™interface

 High precision sensorless motor load measurement stallGuard2

 Energy efficiency and coolness by automatic load dependant motor current regulation coolStep™s20 : Save up to 75% of energy!

 Internal microstep extrapolation allows 256 wave step smoothness with low frequency step input

 Dual edge step option allows half step frequency requirement, e.g. for opto-couplers

 Up to 8A Motor current using external N&P channel MOSFET pairs

 Synchronous rectification reduces transistor heating

 9V to 60V operating voltage (peak)

 3.3V or 5V interface

 QFN32 package for extremely small solution with superior thermal performance

 EMV optimized current controlled gate drivers – up to 45mA gate current

 Overcurrent, short to GND and overtemperature protection and diagnostics integrated

TMC389應用:

 Precision three phase stepper motor drives

 Stage lighting

 Medical applications

 Optical applications

 Robotics

Motor type

 3 phase Stepper

圖1.TMC389基本應用框圖

圖2.TMC389方框圖和應用電路圖

圖2.TMC389采用外接?xùn)艠O驅動器的高壓大電流功率級電路圖

圖2.TMC429 StepDir控制器和SPI互連的示例圖

TMC389評估板

The TMC389 evaluation board features a TMC389 with external power MOSFETs plus a microcontroller, which allows interfacing to a PC for visualization and control of all parameters. The motor can be operated via the step and direction interface, using either an external source, or using the integrated microcontroller as a step pulse generator.

The TMC389-EVAL allows you to explore all functions of the TMC389. The evaluation board comes with a PC software which gives you access to every function of the driver. It comes along with a Step&Direction interface, a RS232 and a USB port. The TMC389-Eval is a complete "plug and play" solution, additionally only a motor, a PC and a power supply are required!

TMC389評估板亮點:

 Evaluate all features of the TMC389

 Use stallGuard2™ with your motor

 Use coolStep™ with your motor

 Control all parameters from a PC

 Motor current can be set to up 6A depending on sense resistor selection.

 Supply voltage up to 40V (MOSFETs can be exchanged against 60V 2A types)
 Access all pins of the TMC389

Motor type

 3 phase Stepper

TMC389-EVAL contains

TMC389-Evaluation Board

USB cable for connection to PC

software for Windows (downloadable)

documentation, board and circuit description and all datasheets (downloadable)

圖3.TMC389-EVAL評估板外形圖

圖4.TMC389-EVAL評估板應用框圖

圖5.TMC389-EVAL評估板元件布局圖

圖6.TMC389-EVAL評估板電路圖(1)

圖7.TMC389-EVAL評估板電路圖(2)

圖8.TMC389-EVAL評估板電路圖(3)

圖9.TMC389-EVAL評估板電路圖(4)
詳情請見:

TMC389_datasheet[1].pdf (1.19 MB) 和

TMC389-EVAL_manual[1].pdf (681.75 KB) 以及

TMC389-EVAL_V10_schematic[1].pdf (95.91 KB)

來源：網絡

本文地址：http://m.qingdxww.cn/thread-88897-1-1.html 【打印本頁】

本站部分文章為轉載或網友發布，目的在于傳遞和分享信息，并不代表本網贊同其觀點和對其真實性負責；文章版權歸原作者及原出處所有，如涉及作品內容、版權和其它問題，我們將根據著作權人的要求，第一時間更正或刪除。