 38047300It disconnects loads powered from DC Power Rail (<6V) with stringent off-state current targets and high load capacitances (up to 200μF). Each switch consists of slew-rate controlled low-impedance MOSFET Switch (29mΩ Typ) and other integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush-current and the resulting excessive voltage droop on power rails. The ET3159 has exceptionally low off-state current drain (<1μA max) which facilitate compliance in very low stand-by power applications. The input voltage range operates from 1.5V to 6.0V DC to fulfill a wide range of applications in consumer, optical, medical, storage, portable, and industrial device power management. Switch control is managed by a logic input (Active HIGH) capable of interfacing directly with low voltage control signal/GPIO with no external pull-down resistor required. In ET3159, 90Ω on-chip load resistor is added for output quick discharge when switch is turned off (EN=0V) ET3159 is in TDFN4 package of 1.2mm by 1.6mm.
1.5V to 6 V operation voltage range Slew Rate/Inrush Control with tR:0.8ms (Typ) Typical RDS(ON): 30mΩ at VIN=5V 33mΩ at VIN=4.3V 38mΩ at VIN=3.6V Low quiescent current < 1 μA ESD Protected: Above 8kV (contact) IEC (IN with 2.2uF cap), 4kV HBM, 1.5kV CDM 產(chǎn)品應(yīng)用： PDAs/smart phones Notebook/netbook computers Tablet PC Portable media players Digital camera GPS navigation devices Data storage devices Optical, industrial, medical, and healthcare devices |
391.77 KB, 下載積分: 積分 -1
