4.2sudo vi /etc/xinetd.conf并加入以下內容：
# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/
defaults
{
# Please note that you need a log_type line to be able to use log_on_success
# and log_on_failure. The default is the following :
# log_type = SYSLOG daemon info
instances = 60
log_type = SYSLOG authpriv
log_on_success = HOST PID
log_on_failure = HOST
cps = 25 30
}
includedir /etc/xinetd.d
----------------------------------------------------------------------------------------------------------------------
各位，以下是開發板UT-S3C6410開發板 telnet
Linux主機的詳細設置，應通過初次驗證，請大家指教。www.urbetter.com
---------------------------------------------------------------------------------------------------------------------
4.3sudo vi /etc/xinetd.d/telnet并加入以下內容：
# default: on
# description: The telnet server serves telnet sessions; it uses
# unencrypted username/password pairs for authentication.
service telnet
{
disable = no
flags = REUSE
socket_type = stream
wait = no
user = root
server = /usr/sbin/in.telnetd
log_on_failure += USERID
}